Electrical Systems Guide

Infrared Heating ElectricalRequirements UK

Each infrared panel plugs into a standard 13A socket or is hardwired to a dedicated spur, no new boiler circuit, no underfloor pipework. A Part P-registered electrician must install any new circuits or spurs. PoweRad's panels meet the IET Wiring Regulations (BS 7671) without modification, and the 250 panel is BEAB Approved, independently certified by Intertek (250 panel, certificate 30095). Most homes need only a consumer unit check and a spur per room. Total electrical install time: 1-2 hours per panel.

Get FREE Savings Analysis →

10-Year Warranty · Room-by-Room Control · Zero Maintenance

What electrical work is needed to install infrared heating?

Electrical Specifications:

•250W power rating at 240V AC
•About 1.0A current draw at 240V (low circuit load)
•230Ω resistance ±10% tolerance
•Power factor: 0.99 (excellent efficiency)
•IP54 ingress protection rating

UK/EU Compliance:

•EN 60335-2-30 (Heating appliances)
•BEAB electrical safety certification (250 panel, Intertek certificate 30095)
•CE marking for European markets
•RoHS environmental compliance
•Auto-cutoff at 65°C for safety

What the Electrical Installation Involves

Dedicated Circuits per Zone

Each zone of panels is connected via a dedicated radial circuit from the consumer unit. This ensures total zone independence, one circuit can be isolated for maintenance without affecting others.

2.5mm² T&E cable used as standard
RCD protection on each circuit
BEAB Approved 250 panel, safe to install in any room

Smart Thermostat Integration

Each zone is controlled via a dedicated thermostat connected to the panel circuit. Smart thermostats allow scheduling, remote access, and integration with home automation systems.

Works with any 230V thermostat
Compatible with major smart home platforms
Can be paired with solar divert controllers

Get a Professional Installation Assessment

Our team can assess your electrical supply and plan your system for a compliant, safe installation.