Nothing on the walls. Every room on its own smart thermostat. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
We cover Wrexham and the villages around it, from Rhosddu, Hightown and Acton to Gresford, Llay, Rossett, Rhos, Ruabon, Chirk and Holt.
From one of our heating jobs
Victorian and Edwardian terraces close to the town centre, and larger houses towards Acton. Each room is sized on its own, so a cold back bedroom gets the panels it needs rather than a share of one boiler.
Villages north of the town with older cottages and newer estates side by side. In a new extension or loft room, the integrated panel goes in with the plasterboard and is skimmed over.
Older terraces and stone cottages in the villages south of the town, many with solid walls. Older homes need more panels per room, which the free survey works out before you commit.
Rural villages towards the English border, where homes without mains gas run on oil, LPG or storage heaters. Infrared means no tank, no deliveries and no boiler to service.
How infrared heating works
A radiator heats the air, and the air then has to warm you. An infrared panel sends most of its warmth straight to whatever it faces: you, the floor, the walls and the furniture. They hold that warmth and warm the air in turn, so the room feels warm without the air doing all the work.
A radiator
Heats the air
A PowerBoard ceiling panel
Warms you and the room
In UK government tests, people rated their comfort under infrared panels no differently from gas central heating with radiators.
From up there the warmth reaches across the room. The same tests found where you sat mattered less under ceiling panels than with wall panels. And they are out of reach, with your walls left free.
The panels reach temperature in about 8 minutes from cold. Silent, nothing to service, and a thermostat in every room, so you only heat the rooms you are using.
Source: Infrared Heating: Investigations from literature and user experience tests, Department for Energy Security and Net Zero, August 2025.
The PowerBoard range
There are three ways to put radiant heat into a room: into the ceiling, onto it, or into the floor. Your free remote survey picks the right one for each room. Every panel carries a 10 year warranty.
Exclusive UK and Ireland distributor
Choose this if
The ceiling's coming down, or it's a new build or extension
Into the ceiling
Boarded in and skimmed over, so it disappears. As far as we know, it is the only heating panel on the UK market that is boarded in and skimmed over like plasterboard.
BEAB approved
It's a finished room and you don't want the mess
Onto the ceiling
Fixed to the ceiling face with no ceiling works. For finished rooms and larger spaces, and the 750 also drops into a standard 600 × 600mm suspended grid.
CE and UKCA marked
New tiles or a new floor are going down anyway
Into the floor
Best under tile and stone, which pass the heat straight through, and it also goes under engineered wood and suitable laminate. For living rooms and bathrooms, with a waterproofing layer in a bathroom.
UKCA marked
Want to price every room yourself? Try the free System Designer
Replacing your heating
If your home runs on oil, LPG or storage heaters, start here. Swap one room at a time and keep the old system until you are done.
For homes off mains gas. Panels in each room replace the boiler, so the tank and the deliveries go with it.
Heat on demand, room by room, instead of an overnight charge that may be gone by the evening.
For homes in town on mains gas: replace an old boiler with heating that has no flue and no annual service.
Heat the new space without running pipes from the old system. The integrated panel is boarded in and skimmed over.
Wrexham homes
Wrexham sits where the Welsh hills drop down to the Cheshire plain, so winter frosts are sharper here than on the coast. A thermostat in each room keeps the rooms you use warm without paying to heat the whole house.
Mains gas heats most of the town, while some of the villages rely on oil, LPG or storage heaters. Infrared takes over one room at a time, so the old system keeps running until the last room is done.
Because we survey remotely, the first step costs nothing and needs no visit: send your room sizes and we send back a drawn plan with every room's panels and a price. The fitting is done by an electrician near you, so nobody has to travel up from the south.
Pick a room, its size and how well it is insulated, and see how many panels it needs, where they go, and what it would cost to heat.
Modern build, double glazing, cavity walls
Most evenings after work
ℹTypical room sizes. For exact dimensions use the detailed calculator below.
Choose your panel
250W = integrated ceiling (ceiling works) · 750W = surface-mount retrofit
For this room on your chosen use: 3 hrs a day, 5 days a week, panels drawing about 39% of that time, at 27p/kWh. Sized the same way as our System Designer.
Ceiling Layout, 6 × 250W
Reference guide for installer or DIY fitting
Work out one of your rooms
That is one room. Your free heating plan does every room in your Wrexham home, with a drawn plan and a clear price.
Proof
From stone cottages to commercial fit-outs. When we arrange the installation, it is done by NICEIC or NAPIT registered electricians, and every panel is backed by a 10-year warranty.
Based in Cross Hands. The exclusive UK and Ireland distributor of PowerBoard, surveying and supplying across the UK.
Certified and accredited
Installations we arrange are carried out by NICEIC or NAPIT registered electricians.
Ready when you are
Start as small or as big as you like.
Smallest step
Not sure yet? Try a PowerBoard 750W plug-in kit in one room. No electrician needed: it stands on wheeled feet or fixes to the wall, and plugs into a normal socket.
£418.80 inc VAT, delivered free
One room
Room kits with the panels and thermostat for one room, matched to its size. Your own qualified electrician fits them, or we can put you in touch with one from our installer network.
Prices on each kit
Whole home
Tell us about your home and we work out the heat loss room by room in a free remote survey, then send you a design and a quote.
Free, and no obligation
Questions
Yes. We design every job from your room sizes or plans, so the survey needs no visit. The panels are delivered to you, and the fitting is done by an electrician near you, your own or one we put you in touch with.
Yes. Panels in each room replace the oil boiler, so there is no tank to fill, no deliveries to book and no annual boiler service. You can keep the oil heating running while the rooms are switched over.
Yes. Instead of storing heat overnight and hoping it lasts, each room has a panel and a thermostat that heats when you need it, so a room you are not using costs nothing.
Yes. Older houses lose more heat, so they need more panels per room, which the survey works out from your measurements. The panels are fixed to the ceiling surface, so floors stay down and the house can be done a room at a time.
Yes. With the ceiling open, our integrated 250 watt panel is fixed to the joists, boarded round and skimmed, so nothing shows once it is painted. Your builder and electrician work to our drawn plan.
No. We supply electric infrared heating only, the alternative to a new boiler, with nothing burning in the house and no flue to fit. Weighing the two up? Our infrared vs gas boiler page sets out what each costs to run.
Not for fitting panels inside an ordinary home. If your home is listed, check with Wrexham County Borough Council first, as listed building consent also covers work inside.
Unit 8, Parc Gelli Werdd, Cross Hands, SA14 6EF, in South Wales. We survey Wrexham homes remotely, so there is no wait for a visit.