Nothing on the walls. Heat only the rooms you use. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
Bathroom
Up to 5m², boarded in
£632 exc. VAT
Bedroom
Up to 12m², surface fit
£787 exc. VAT
Bedroom, integrated
Up to 12m², boarded in
£1,379 exc. VAT
Kitchen
Up to 16m², surface fit
Living room
Up to 25m², surface fit
£1,485 exc. VAT
You are viewing this kit
PowerBoard-S 750W Infrared Panel
Qty: 4
£1,396
WiFi Smart Thermostat
Qty: 1
£89
You will also need
Not included
The question that actually matters with electric heating.
Comparing with what you have now? See our worked examples against storage heaters, oil and gas.
154p
A day to run this kit, in typical zoned use
£46.75
A month across the heating season
£561
A year, spread over the full heating schedule
Based on about 5 heating hours a day with panels actually drawing power roughly 38% of that time, because thermostats cycle panels off once a room is at temperature and unoccupied rooms are not heated, at 27p/kWh. We keep this rate fixed, set just above Ofgem's price cap when we chose it (26.32p, October 2026).
Our most powerful room kit - four PowerBoard-S 750W ceiling panels delivering 3,000W of infrared warmth for large living rooms and open-plan spaces. Like sitting in sunshine: infrared warms you and every surface in the room directly, so the room still feels warm when a door or window opens. Smart thermostat with weekly scheduling included.
4× 750W panels and a WiFi thermostat - all pre-matched, no guesswork
3,000W total output handles living rooms and open-plan spaces up to 25m²
Infrared warms people and surfaces like sunshine, so the room recovers quickly after a door opens
CE and UKCA marked, tested to EN 60335-2-17
Frame on, plug in, wire at the thermostat. Up to 7 x 500W or 4 x 750W panels run on one 16A circuit.
Side-by-side against the most common electric heating types people switch from.
Swipe the table sideways to compare all five heating types.
Surface mount, powder-coated, no painting required. Most electricians fit it in about half a day.
Mark ceiling joist positions and plan your cable route to the thermostat location.
Fix the surface mounting frame to the ceiling joists using the screws listed on the fixing guide sheet, supplied by your installer.
The panel lead connects at its sealed rear connection box, so there is no wiring to open up at the panel. Run the supply cable to the thermostat.
Connect the circuit at the thermostat (Part P certified electrician). Set temperature, verify operation, and you're done.
Three surface panels heating a living room, a real PoweRad installation
A real review, on our Google profile.
★★★★★ 5 out of 5 from 3 Google reviews · showing one of them
See how these systems were designed and installed in our case studies.
Frequently ordered alongside this product
Heat your living room or kitchen in 10 minutes - fewer panels, less wiring, no boiler
Warm in under 10 minutes, with every wall left free for units
Silent warmth for bedrooms up to 12m² - wake up to a warm room, no noise, no fuss
The heating is one part of an all-electric home. Everything here is designed to run together, and we supply and specify all of it.
Run the heating on your own generation and cut the running cost to the export rate you gave up.
Room-by-room schedules, presence detection and one app for the whole house.
Divert surplus solar into the cylinder and heat water off-peak, alongside the panels.
Our team can help size the right system for your property, call free on 0800 342 3800
Living Room Infrared Heating Kit
£1,485