Nothing on the walls. Heat only the rooms you use. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
Bathroom
Up to 5m², boarded in
£632 exc. VAT
You are viewing this kit
Bedroom
Up to 12m², surface fit
£787 exc. VAT
Bedroom, integrated
Up to 12m², boarded in
£1,379 exc. VAT
Kitchen
Up to 16m², surface fit
Living room
Up to 25m², surface fit
£1,485 exc. VAT
PowerBoard-S 250W Infrared Panel
Qty: 2
£498
WiFi Smart Thermostat
Qty: 1
£89
PowerBoard Cable Kit
£45
You will also need
Not included
The question that actually matters with electric heating.
Comparing with what you have now? See our worked examples against storage heaters, oil and gas.
26p
A day to run this kit, in typical zoned use
£7.79
A month across the heating season
£94
A year, spread over the full heating schedule
Based on about 5 heating hours a day with panels actually drawing power roughly 38% of that time, because thermostats cycle panels off once a room is at temperature and unoccupied rooms are not heated, at 27p/kWh. We keep this rate fixed, set just above Ofgem's price cap when we chose it (26.32p, October 2026).
Everything you need to heat a standard UK bathroom (up to 5m²) with quiet, clean infrared radiant heat. Two PowerBoard-S 250W ceiling panels, a WiFi smart thermostat, and a matched cable kit - all in one box. No boiler, no towel rail, no pipes. Just order, fit, and enjoy a warm bathroom.
2× 250W ceiling panels, WiFi thermostat & cable kit - pre-matched so you know it all works together, nothing extra to buy
500W total output is correctly sized for a bathroom up to 5m² - warm enough to be comfortable, efficient enough not to waste energy
No fan noise, nothing to clean, just quiet radiant warmth at full output in under 10 minutes
BEAB Approved 250 panels (Intertek certificate 30095), IP54 rated, with your electrician positioning them for the bathroom zones
Four parts, one circuit. Pre-made leads click into the sealed four-way adapter, so your electrician wires the room, not every panel.
Side-by-side against the most common electric heating types people switch from.
Swipe the table sideways to compare all five heating types.
Integrated: boarded flush into the ceiling, then skimmed and painted with the rest of it. Most electricians fit it in about half a day.
Mark the opening position between ceiling joists, the panel sits flush within a 12.5mm plasterboard layer. No recess frame is needed.
No bracket required. Secure the panel directly to the ceiling joists or noggins with 8 × 38mm screws (supplied by your installer) through the pre-drilled holes, the panel sits flush with the plasterboard face.
Connect the plug-and-play cable harness to the panel connector, no hardwiring at the panel. Run the supply cable through the ceiling void to the thermostat.
Fill around the panel edges, paint directly over the paper-coated surface to match your ceiling, then have a Part P certified electrician connect the circuit at the thermostat.
PowerBoard-S panel ceiling installation, plug-and-play harness system
A real review, on our Google profile.
★★★★★ 5 out of 5 from 3 Google reviews · showing one of them
See how these systems were designed and installed in our case studies.
Frequently ordered alongside this product
Warm your bathroom or small room in 10 minutes - no boiler, no pipes, no fuss
Silent warmth for bedrooms up to 12m² - wake up to a warm room, no noise, no fuss
The heating is one part of an all-electric home. Everything here is designed to run together, and we supply and specify all of it.
Run the heating on your own generation and cut the running cost to the export rate you gave up.
Room-by-room schedules, presence detection and one app for the whole house.
Divert surplus solar into the cylinder and heat water off-peak, alongside the panels.
Our team can help size the right system for your property, call free on 0800 342 3800
Bathroom Infrared Heating Kit
£632