Nothing on the walls. Every room on its own smart thermostat. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
We cover Swansea and the areas around it, from the city centre, Uplands and Sketty to Mumbles and Gower, Morriston, Llansamlet, Gorseinon and Pontarddulais, and across to Neath and Port Talbot.
Our nearest heating job, about 12 miles away
Tall Victorian and Edwardian terraces, many split into flats or let to students. Every room on its own thermostat suits a shared house, and surface panels fit high ceilings without touching the original cornicing.
Seafront flats, older villas and holiday homes. A holiday home only needs heating before guests arrive, which is what a thermostat in each room is for. In a period home, panels go on the ceiling with no pipes run through the walls; if it is listed, check consent with the council first.
Post-war semis and newer estates, some with storage heaters or older electric heaters. Replacing them room by room means the house keeps its heating while the work is done.
Where we fitted ceiling heating in a beauty salon, with the spotlights built into the ceiling. Homes here run from village terraces to newer estates on the edge of town, and it sits between our base and the city.
How infrared heating works
A radiator heats the air, and the air then has to warm you. An infrared panel sends most of its warmth straight to whatever it faces: you, the floor, the walls and the furniture. They hold that warmth and warm the air in turn, so the room feels warm without the air doing all the work.
A radiator
Heats the air
A PowerBoard ceiling panel
Warms you and the room
In UK government tests, people rated their comfort under infrared panels no differently from gas central heating with radiators.
From up there the warmth reaches across the room. The same tests found where you sat mattered less under ceiling panels than with wall panels. And they are out of reach, with your walls left free.
The panels reach temperature in about 8 minutes from cold. Silent, nothing to service, and a thermostat in every room, so you only heat the rooms you are using.
Source: Infrared Heating: Investigations from literature and user experience tests, Department for Energy Security and Net Zero, August 2025.
The PowerBoard range
There are three ways to put radiant heat into a room: into the ceiling, onto it, or into the floor. Your free remote survey picks the right one for each room. Every panel carries a 10 year warranty.
Exclusive UK and Ireland distributor
Choose this if
The ceiling's coming down, or it's a new build or extension
Into the ceiling
Boarded in and skimmed over, so it disappears. As far as we know, it is the only heating panel on the UK market that is boarded in and skimmed over like plasterboard.
BEAB approved
It's a finished room and you don't want the mess
Onto the ceiling
Fixed to the ceiling face with no ceiling works. For finished rooms and larger spaces, and the 750 also drops into a standard 600 × 600mm suspended grid.
CE and UKCA marked
New tiles or a new floor are going down anyway
Into the floor
Best under tile and stone, which pass the heat straight through, and it also goes under engineered wood and suitable laminate. For living rooms and bathrooms, with a waterproofing layer in a bathroom.
UKCA marked
Want to price every room yourself? Try the free System Designer
Replacing your heating
If your electric heating costs too much or runs out too soon, start here. Whatever you have now, the survey sets the running costs side by side.
They charge overnight and are often cold by the evening. Panels heat each room when you are in it, with no bricks to charge and nothing left on all night.
Wall panel heaters and fan heaters warm the air near them. A ceiling panel warms the people and furniture across the room, and every room gets a proper thermostat.
Replacing an old boiler? Infrared is the all-electric option, with nothing to service each year and no flue on the outside wall.
For homes on Gower and in the villages without mains gas: no tank, no deliveries and no outside boiler to keep running.
Swansea homes
Swansea sits on Swansea Bay, with Gower to the west and the valleys to the north, so winters are mild but wet and windy, with the weather coming in off the Atlantic. A panel's warmth lands on you, the floor and the furniture, and those surfaces hold on to it.
Most Swansea homes heat with mains gas, and some flats and older homes still run storage heaters or older electric heaters. Any of these can be swapped room by room, with a thermostat in each room. Add solar panels or a battery later and the heating can run on your own power.
Most people ask us two things: who will fit it, and what it will cost to run. An electrician from our installer network, or your own, fits and certifies it, usually in one to two days. The free remote survey sizes every room and sets the running cost beside what you have now, without a sales visit.
Pick a room, its size and how well it is insulated, and see how many panels it needs, where they go, and what it would cost to heat.
Modern build, double glazing, cavity walls
Most evenings after work
ℹTypical room sizes. For exact dimensions use the detailed calculator below.
Choose your panel
250W = integrated ceiling (ceiling works) · 750W = surface-mount retrofit
For this room on your chosen use: 3 hrs a day, 5 days a week, panels drawing about 39% of that time, at 27p/kWh. Sized the same way as our System Designer.
Ceiling Layout, 6 × 250W
Reference guide for installer or DIY fitting
Work out one of your rooms
That is one room. Your free heating plan does every room in your Swansea home, with a drawn plan and a clear price.
Proof
From stone cottages to commercial fit-outs. When we arrange the installation, it is done by NICEIC or NAPIT registered electricians, and every panel is backed by a 10-year warranty.
Based in Cross Hands. The exclusive UK and Ireland distributor of PowerBoard, surveying and supplying across the UK.
Certified and accredited
Installations we arrange are carried out by NICEIC or NAPIT registered electricians.
Ready when you are
Start as small or as big as you like.
Smallest step
Not sure yet? Try a PowerBoard 750W plug-in kit in one room. No electrician needed: it stands on wheeled feet or fixes to the wall, and plugs into a normal socket.
£418.80 inc VAT, delivered free
One room
Room kits with the panels and thermostat for one room, matched to its size. Your own qualified electrician fits them, or we can put you in touch with one from our installer network.
Prices on each kit
Whole home
Tell us about your home and we work out the heat loss room by room in a free remote survey, then send you a design and a quote.
Free, and no obligation
Questions
We design the system and supply the panels from Cross Hands, and an electrician from our installer network fits it, or your own qualified electrician can. The work is done to BS 7671 and certified. Their fitting price comes with your plan, so you see the full cost before anyone arrives. We size every room first from a free remote survey, so the panel count is right.
Yes. Each room gets its own thermostat and heats when you want it, rather than charging overnight and running low by the evening. The free remote survey works out the panels and circuits each room needs and sets the running costs side by side with what you have now.
Yes. Every room has its own smart thermostat as standard. If you want the whole house on one system, tied in with lighting, blinds or solar, we are an authorised Loxone Silver Partner and can design that in.
No. We fit all-electric infrared heating, in the ceiling or under the floor, as the alternative to a new gas boiler: no flue, no boiler service and nothing burning in the house. Our infrared vs gas boiler page sets the running costs side by side.
Yes. We have fitted ceiling heating in a beauty salon in Pontarddulais, with the spotlights built into the ceiling. Ceiling infrared suits offices, shops, workshops, gyms and halls, because it warms the people and surfaces rather than the air under a high ceiling. Send us the floor plans and we will come back with a design and a price.
Yes. Every room has its own thermostat and heating times, so the rooms your guests use can be warm for arrival and the rest left off between bookings. There is no boiler to service and no oil tank to keep filled.
Yes. Each bedroom has its own thermostat, so one tenant can be warm without heating the whole house, and there is no shared boiler to break down mid-term. Surface panels go on the ceiling with no floors lifted between lets.
No, for a normal home. Panels on or in the ceiling and film under the floor are inside work for an electrician, with no flue, outdoor unit or tank to apply for. A listed building is different: speak to Swansea Council first, as consent covers internal changes too.
Unit 8, Parc Gelli Werdd, Cross Hands, SA14 6EF, about 15 miles from Swansea.