Skip to main content
BEAB APPROVED BY INTERTEK (250 PANEL)
Infrared Ceiling Heating for Homeowners

Nothing on the walls. Heat only the rooms you use. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.

Heating Kit

Bedroom Infrared Heating Kit, Integrated

The same warmth, boarded into the ceiling so you never see it.

Get FREE Savings Analysis →

10-Year Warranty · Room-by-Room Control · Zero Maintenance

Is this the right kit for your room?

Bathroom

Up to 5m², boarded in

£632 exc. VAT

Bedroom

Up to 12m², surface fit

£787 exc. VAT

Bedroom, integrated

Up to 12m², boarded in

£1,379 exc. VAT

You are viewing this kit

Kitchen

Up to 16m², surface fit

Living room

Up to 25m², surface fit

£1,485 exc. VAT

What's Included in This Kit

PowerBoard-S 250W Infrared Panel

Qty: 5

£1,245

WiFi Smart Thermostat

Qty: 1

£89

PowerBoard Cable Kit

£45

You will also need

Not included

What does it cost to run?

The question that actually matters with electric heating.

Comparing with what you have now? See our worked examples against storage heaters, oil and gas.

64p

A day to run this kit, in typical zoned use

£19.48

A month across the heating season

£234

A year, spread over the full heating schedule

Based on about 5 heating hours a day with panels actually drawing power roughly 38% of that time, because thermostats cycle panels off once a room is at temperature and unoccupied rooms are not heated, at 27p/kWh. We keep this rate fixed, set just above Ofgem's price cap when we chose it (26.32p, October 2026).

Key Benefits

A complete infrared heating solution for a double bedroom, built around the integrated 250W panel. Five panels are boarded into the ceiling, skimmed and painted, so once the decorator has finished there is nothing to see at all. No radiator on the wall, no grille, no fitting. Smart thermostat and the plug and play wiring harness are included.

Everything in One Box

5 x 250W integrated panels, WiFi thermostat and the plug and play harness, pre-matched

Sized for a Double Bedroom

1,250W across five panels spreads the heat evenly over a room up to 12m2, rather than concentrating it in one spot

Completely Invisible

Board, skim, paint and it disappears into the ceiling. Nothing protrudes, nothing collects dust, nothing to decorate around

Safe and Certified

BEAB Approved by Intertek (250 panel, certificate 30095), CE and UKCA marked

How the system connects

Four parts, one circuit. Pre-made leads click into the sealed four-way adapter, so your electrician wires the room, not every panel.

How does infrared compare?

Side-by-side against the most common electric heating types people switch from.

Swipe the table sideways to compare all five heating types.

How It's Installed

Integrated: boarded flush into the ceiling, then skimmed and painted with the rest of it. Most electricians fit it in about half a day.

Mark & plan

Mark the opening position between ceiling joists, the panel sits flush within a 12.5mm plasterboard layer. No recess frame is needed.

Fix panel with 8 × 38mm screws

No bracket required. Secure the panel directly to the ceiling joists or noggins with 8 × 38mm screws (supplied by your installer) through the pre-drilled holes, the panel sits flush with the plasterboard face.

Connect harness

Connect the plug-and-play cable harness to the panel connector, no hardwiring at the panel. Run the supply cable through the ceiling void to the thermostat.

Skim, paint & commission

Fill around the panel edges, paint directly over the paper-coated surface to match your ceiling, then have a Part P certified electrician connect the circuit at the thermostat.

PowerBoard-S panel ceiling installation, plug-and-play harness system

What the customer said

A real review, on our Google profile.

★★★★★ 5 out of 5 from 3 Google reviews · showing one of them

See how these systems were designed and installed in our case studies.

You May Also Need

Frequently ordered alongside this product

PowerBoard-S 250W Infrared Ceiling Heating Panel

Warm your bathroom or small room in 10 minutes - no boiler, no pipes, no fuss

Bedroom Infrared Heating Kit

Silent warmth for bedrooms up to 12m² - wake up to a warm room, no noise, no fuss

Bathroom Infrared Heating Kit

Two BEAB Approved panels boarded flush into the bathroom ceiling, warm in under 10 minutes

Works with your energy system

The heating is one part of an all-electric home. Everything here is designed to run together, and we supply and specify all of it.

Pairs with solar PV

Run the heating on your own generation and cut the running cost to the export rate you gave up.

Zones with Loxone

Room-by-room schedules, presence detection and one app for the whole house.

Smart hot water

Divert surplus solar into the cylinder and heat water off-peak, alongside the panels.

Check it suits your room, then order

Our team can help size the right system for your property, call free on 0800 342 3800

Bedroom Infrared Heating Kit, Integrated

£1,379