Nothing on the walls. Every room on its own smart thermostat. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
We cover Llanelli and the villages around it, from Burry Port, Pembrey and Kidwelly to Felinfoel, Dafen, Llwynhendy, Bynea and Pontarddulais, and up the Gwendraeth valley to Cross Hands and Tumble.
Our nearest heating job, about 11 miles away
Older terraces and semis, many with a front room and back room downstairs and a back kitchen added later. Surface panels go onto the ceiling of each room with no floors lifted, and the back kitchen can have its own panel and thermostat, so it is no longer the cold end of the house.
Newer homes and flats on the coast side of town, usually well insulated, so fewer panels heat each room. If a kitchen or bathroom is being refitted, the integrated 250 watt panel can go into the new ceiling and be skimmed over, or heating film can go under new tiles.
A mix of village terraces, bungalows and newer estates. Bungalows suit ceiling heating well: one ceiling level, and every room can be reached from the loft for wiring, which keeps the fitting simple for the electrician.
Our own patch: we are based on the industrial estate in Cross Hands. Older cottages and newer estates sit side by side here, and some homes off the main roads run on oil, LPG or storage heaters rather than mains gas.
How infrared heating works
A radiator heats the air, and the air then has to warm you. An infrared panel sends most of its warmth straight to whatever it faces: you, the floor, the walls and the furniture. They hold that warmth and warm the air in turn, so the room feels warm without the air doing all the work.
A radiator
Heats the air
A PowerBoard ceiling panel
Warms you and the room
In UK government tests, people rated their comfort under infrared panels no differently from gas central heating with radiators.
From up there the warmth reaches across the room. The same tests found where you sat mattered less under ceiling panels than with wall panels. And they are out of reach, with your walls left free.
The panels reach temperature in about 8 minutes from cold. Silent, nothing to service, and a thermostat in every room, so you only heat the rooms you are using.
Source: Infrared Heating: Investigations from literature and user experience tests, Department for Energy Security and Net Zero, August 2025.
The PowerBoard range
There are three ways to put radiant heat into a room: into the ceiling, onto it, or into the floor. Your free remote survey picks the right one for each room. Every panel carries a 10 year warranty.
Exclusive UK and Ireland distributor
Choose this if
The ceiling's coming down, or it's a new build or extension
Into the ceiling
Boarded in and skimmed over, so it disappears. As far as we know, it is the only heating panel on the UK market that is boarded in and skimmed over like plasterboard.
BEAB approved
It's a finished room and you don't want the mess
Onto the ceiling
Fixed to the ceiling face with no ceiling works. For finished rooms and larger spaces, and the 750 also drops into a standard 600 × 600mm suspended grid.
CE and UKCA marked
New tiles or a new floor are going down anyway
Into the floor
Best under tile and stone, which pass the heat straight through, and it also goes under engineered wood and suitable laminate. For living rooms and bathrooms, with a waterproofing layer in a bathroom.
UKCA marked
Want to price every room yourself? Try the free System Designer
Replacing your heating
If you have warm air heating, start here. Whatever you have, you can keep it running while you switch over room by room.
One unit heating the whole house through ducts. A panel and thermostat in each room replaces it, and the unit can be taken out of use once every room is done.
If the boiler is near the end of its life, replace it with no boiler at all: no flue, no annual service and nothing to repair in the airing cupboard.
For homes without mains gas: no tank to fill, no deliveries to book and nothing outside the house to maintain.
Instead of charging overnight and running low by teatime, each room heats when you want it, on its own thermostat.
Llanelli homes
Llanelli faces the Loughor estuary and Carmarthen Bay, so winters here are mild but wet and windy, with the weather coming straight in off the Atlantic. Infrared panels warm the walls, floor and furniture as well as the people in the room, rather than heating the air first.
Most homes in the town heat with mains gas, some of the villages around it rely on oil, LPG or storage heaters, and some older homes still run warm air heating. Whichever you have, infrared replaces it room by room. It runs on electricity, so it can also use power from solar panels or a home battery.
Whatever you are replacing, two questions decide it: what it will cost to run, and how that compares with replacing like for like. A free remote survey answers both with figures for your own home, without a sales visit.
Pick a room, its size and how well it is insulated, and see how many panels it needs, where they go, and what it would cost to heat.
Modern build, double glazing, cavity walls
Most evenings after work
ℹTypical room sizes. For exact dimensions use the detailed calculator below.
Choose your panel
250W = integrated ceiling (ceiling works) · 750W = surface-mount retrofit
For this room on your chosen use: 3 hrs a day, 5 days a week, panels drawing about 39% of that time, at 27p/kWh. Sized the same way as our System Designer.
Ceiling Layout, 6 × 250W
Reference guide for installer or DIY fitting
Work out one of your rooms
That is one room. Your free heating plan does every room in your Llanelli home, with a drawn plan and a clear price.
Proof
From stone cottages to commercial fit-outs. When we arrange the installation, it is done by NICEIC or NAPIT registered electricians, and every panel is backed by a 10-year warranty.
Based in Cross Hands. The exclusive UK and Ireland distributor of PowerBoard, surveying and supplying across the UK.
Certified and accredited
Installations we arrange are carried out by NICEIC or NAPIT registered electricians.
Ready when you are
Start as small or as big as you like.
Smallest step
Not sure yet? Try a PowerBoard 750W plug-in kit in one room. No electrician needed: it stands on wheeled feet or fixes to the wall, and plugs into a normal socket.
£418.80 inc VAT, delivered free
One room
Room kits with the panels and thermostat for one room, matched to its size. Your own qualified electrician fits them, or we can put you in touch with one from our installer network.
Prices on each kit
Whole home
Tell us about your home and we work out the heat loss room by room in a free remote survey, then send you a design and a quote.
Free, and no obligation
Questions
Yes. A warm air system heats the whole house from one unit through ducts. Infrared replaces it with slim panels in or on the ceiling, or heating film under the floor, in each room, each on its own smart thermostat, so the old unit and ducting can be taken out of use. There is no boiler, no flue and no annual service. We size every room from a free remote survey before you commit to anything.
No. We supply all-electric infrared heating, in the ceiling or under the floor, which is the alternative to fitting a new gas boiler. If your gas system is due for replacement, our infrared vs gas boiler page sets the running costs side by side, so you can decide with real numbers.
Yes. Ceiling infrared suits offices, shops, workshops, gyms, halls and churches, because it warms the people and surfaces rather than the whole volume of air under a high ceiling. Each zone has its own thermostat and times. We design commercial jobs from your floor plans and send a priced proposal.
Yes. Infrared runs on electricity, so it can use what your solar panels generate, and a home battery lets you store daytime solar, or cheaper overnight electricity, for the evening. We install solar and batteries as well, including a system in Ammanford, about 11 miles from Llanelli.
Yes. An older terrace loses more heat, so each room needs more panels, and the free survey works that out from your room sizes. Surface panels go onto the ceiling you have, so nothing is lifted, and you can start with the coldest room and do the rest later.
Usually one to two days for a whole house, by an electrician from our installer network or your own. The panels come from our UK stock, so there is no long wait for parts.
Not for heating panels inside your home. It is internal electrical work, which the electrician tests and certifies. If your home is a listed building, check with Carmarthenshire County Council first, because listed building consent covers inside work too.