Nothing on the walls. Heat only the rooms you use. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
Telford is one of the UK's largest new towns, with TF-postcode housing dominated by 1970s and 1980s estates spread across the named townships of Wellington, Madeley, Dawley and Oakengates. Telford & Wrekin Council has been steadily upgrading EPC-poor stock through a council-led retrofit programme. Shropshire winters here average around 3.5°C and the heating season runs close to seven months, with the elevated Wrekin landscape bringing sharp morning frosts. PoweRad's Telford installers fit ceiling-mounted infrared panels across TF1 to TF7, with particular experience in modern terraces and apartment blocks where the original heating was electric storage - usually a cost-prohibitive system to keep running. Replacing it with infrared panels is typically a single day per room and immediately gives each space its own thermostat.
PoweRad fits ceiling-mounted infrared panels across Telford and nearby areas including Shrewsbury, Wolverhampton and Birmingham. With local homes typically rated EPC C, moving from storage heaters or an ageing gas system to room-by-room infrared is a straightforward way to lift comfort and efficiency.
No boiler, no radiators, no pipework. Slim electric panels sit flat on the ceiling and warm the room the same way the sun warms you.
Around 3cm thin and out of sight overhead. They free up every wall, and there is nothing for children or pets to touch.
Infrared warms the walls, floor and furniture directly, the way sunshine does. The warmth is even from floor to ceiling and does not vanish the moment a door opens.
Panels reach full output in under 10 minutes and every room is controlled separately, so you only ever heat the rooms you are using.
The numbers that shape heating bills in Telford, Shropshire.
The numbers for Telford: 68,000 households, 91% on gas, average energy bills of £124 a month. Room-by-room infrared control can cut heating costs by up to 40% compared with an ageing gas system, and the free remote survey works out what that means for your home specifically. See how we calculate savings
Plenty of Telford homes still run ageing warm-air units, gas boilers or LPG systems that cost more every year to fuel, service and repair. Infrared ceiling panels are the modern electric replacement: no pipework, no flue, no annual service. Panels are fitted room by room, usually in 1-2 days, and every room gets its own thermostat so you stop heating empty space.
Panels are independent of the existing pipework, so you can switch over room by room and cap the old system when it suits you.
No annual gas safety check, no boiler service contract, no parts to fail. A 10-year product warranty instead.
A free remote heat-loss survey gives you a like-for-like running cost comparison against your current system before you decide anything.
See how PowerBoard's advanced infrared technology solves the most common heating challenges faced by Telford properties.
Common heating challenge affecting many Telford properties.
Advanced infrared technology delivering superior heating performance.
PowerBoard heating systems meet the highest industry standards for safety, efficiency, and performance in Telford installations.
European Conformity certification ensuring safety standards
Hazardous Substances compliance for environmental safety
Meets UK electrical safety and building regulations
Understanding Telford's unique climate, property landscape, and energy profile
Telford sits on slightly elevated ground in east Shropshire, with January averages around 3.5°C and sharp morning frost on clear nights. The Wrekin landscape moderates winds but the heating season runs close to seven months in the older estates.
The TF-postcodes are dominated by the new-town housing built since the 1970s across the named townships of Wellington, Madeley, Dawley and Oakengates, plus the listed industrial heritage of Ironbridge Gorge (a UNESCO World Heritage Site). The new-town estates have unusually consistent housing standards but were largely built when electric storage heating was cheaper than gas.
Telford & Wrekin Council has been steadily upgrading EPC-poor stock through a council-led retrofit programme. The TF-postcodes have a higher-than-average share of electric storage heaters as a legacy of the new-town construction era.
The defining Telford heating problem is electric storage heater retrofits in the 1970s and 1980s new-town estates, where the storage heaters are now beyond economic repair. Replacing storage heaters with infrared panels reuses the existing electrical circuits and immediately gives each room its own thermostat.
Simple, reliable heating backed by genuine guarantees
Comprehensive manufacturer warranty for complete peace of mind
Professional installation with minimal disruption to your home
Independently safety certified by Intertek (250 panel, certificate 30095)
No moving parts means no annual servicing or repair costs
Instant radiant warmth with no waiting for radiators to warm up
No fans, pumps or boiler noise, just completely silent heating
Anyone with basic DIY skills can install infrared heating panels in Telford. Mount panels yourself, connect the cable harness, and get electrician sign-off for thermostat installation.
Calculate panel requirements based on room size and insulation. Use our online calculator to determine how many panels you need for effective heating coverage.
Securely mount panels to ceiling using included brackets. Connect panels together using cable harness and 4-way adaptors. Simple plug-and-play connections anyone can do.
Certified electrician connects and tests thermostat, ensures system safety, and provides electrical compliance certification. Required for warranty validation.
Control your heating from anywhere using the smart thermostat app. Set schedules, adjust temperatures room-by-room, and monitor energy usage in real-time.
Save on installation costs by mounting panels yourself. Simple, safe, and straightforward process.
Electrician certification ensures safety standards and maintains your 10-Year Warranty coverage.
Advanced app control with scheduling, zone management, and energy monitoring capabilities.
Tell the System Designer about your rooms and it works out how many panels you need and what they cost. Takes a few minutes, no details required until you are ready.
Answer 4 quick questions to receive a detailed, personalised quote for your Telford property. A real person comes back to you within one working day.
Step 1 of 4
Common questions about infrared heating installation in Telford and Shropshire
PowerBoard panels start from £249 per panel. Installation costs vary by property size and the number of panels needed. We provide a free, no-obligation remote survey and quote for all Shropshire properties, with fully transparent pricing and no hidden costs.
Free remote survey • Honest pricing • 10-Year Warranty
We provide turnkey professional installation for offices, retail spaces, healthcare facilities, and industrial properties. Get expert planning, certified installers, and ongoing support.
Professional installation across all major cities
PoweRad approved engineers serving your area.
Looking for a local PowerBoard installer in Telford?
Browse our certified installer network or book a free remote survey and PoweRad will connect you with an approved engineer in your area.
Optional installer network & surveys
Climate, housing & energy data
No-obligation heating assessment
Buying advice & how-to articles