Nothing on the walls. Every room on its own smart thermostat. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
We cover Cardiff and the areas around it, from Roath, Cathays, Canton and Pontcanna to Llandaff, Whitchurch, Cardiff Bay and Penarth, and out to Caerphilly, Pontypridd and Barry.
From one of our heating jobs
Long rows of Victorian and Edwardian terraces, with a lot of student and shared houses around Cathays. A thermostat in every room means each tenant heats their own room, and panels go on the ceiling without lifting floorboards.
Larger period houses with high ceilings and original features. Surface panels are fixed to the ceiling face, so there are no radiators on the walls and no pipework through old plaster. A full system can be designed for the whole house at once.
Mostly flats, some already heated by electric. Infrared replaces old panel or storage heaters without any work outside the flat, which matters where the building has rules about flues and pipework.
Newer, well insulated homes need fewer panels per room. For an extension or loft conversion, the integrated panel goes in with the plasterboard, the way we did it in a new build extension in Llanharan.
How infrared heating works
A radiator heats the air, and the air then has to warm you. An infrared panel sends most of its warmth straight to whatever it faces: you, the floor, the walls and the furniture. They hold that warmth and warm the air in turn, so the room feels warm without the air doing all the work.
A radiator
Heats the air
A PowerBoard ceiling panel
Warms you and the room
In UK government tests, people rated their comfort under infrared panels no differently from gas central heating with radiators.
From up there the warmth reaches across the room. The same tests found where you sat mattered less under ceiling panels than with wall panels. And they are out of reach, with your walls left free.
The panels reach temperature in about 8 minutes from cold. Silent, nothing to service, and a thermostat in every room, so you only heat the rooms you are using.
Source: Infrared Heating: Investigations from literature and user experience tests, Department for Energy Security and Net Zero, August 2025.
The PowerBoard range
There are three ways to put radiant heat into a room: into the ceiling, onto it, or into the floor. Your free remote survey picks the right one for each room. Every panel carries a 10 year warranty.
Exclusive UK and Ireland distributor
Choose this if
The ceiling's coming down, or it's a new build or extension
Into the ceiling
Boarded in and skimmed over, so it disappears. As far as we know, it is the only heating panel on the UK market that is boarded in and skimmed over like plasterboard.
BEAB approved
It's a finished room and you don't want the mess
Onto the ceiling
Fixed to the ceiling face with no ceiling works. For finished rooms and larger spaces, and the 750 also drops into a standard 600 × 600mm suspended grid.
CE and UKCA marked
New tiles or a new floor are going down anyway
Into the floor
Best under tile and stone, which pass the heat straight through, and it also goes under engineered wood and suitable laminate. For living rooms and bathrooms, with a waterproofing layer in a bathroom.
UKCA marked
Want to price every room yourself? Try the free System Designer
Replacing your heating
If your gas boiler is due for replacing, start here: one design for the whole house, rather than a heater at a time.
We design the full system in one go: every room sized, the panels placed on a plan and a thermostat in each room. The boiler can stay in use until the new system is running.
Panel heaters, storage heaters or a mix. Ceiling panels free the walls, and nothing changes outside the flat.
Heat the new space without extending the pipework. The integrated panel is boarded in and skimmed, so the ceiling looks like any other.
Heat on demand instead of an overnight charge that has gone by the evening, each room on its own thermostat.
Cardiff homes
Cardiff sits where the Taff and the Ely meet the Severn Estuary, so winters are mild but damp, with wet weather coming in from the south-west. Radiant heat from the ceiling warms the people, floor and furniture directly, rather than relying on air moved round the room by radiators.
Most Cardiff homes heat with mains gas, and some flats run on electric heaters. Infrared replaces either, room by room or as a full system for the whole house. Because it runs on electricity, it pairs with a home battery and solar panels, which we can design in at the same time.
For a full heating system, three things decide it: the heat loss of each room, the running cost against what you have now, and who fits it. The free remote heat loss assessment answers the first two with figures for your own home, and an electrician from our installer network, or your own, does the fitting.
Pick a room, its size and how well it is insulated, and see how many panels it needs, where they go, and what it would cost to heat.
Modern build, double glazing, cavity walls
Most evenings after work
ℹTypical room sizes. For exact dimensions use the detailed calculator below.
Choose your panel
250W = integrated ceiling (ceiling works) · 750W = surface-mount retrofit
For this room on your chosen use: 3 hrs a day, 5 days a week, panels drawing about 39% of that time, at 27p/kWh. Sized the same way as our System Designer.
Ceiling Layout, 6 × 250W
Reference guide for installer or DIY fitting
Work out one of your rooms
That is one room. Your free heating plan does every room in your Cardiff home, with a drawn plan and a clear price.
Proof
From stone cottages to commercial fit-outs. When we arrange the installation, it is done by NICEIC or NAPIT registered electricians, and every panel is backed by a 10-year warranty.
Based in Cross Hands. The exclusive UK and Ireland distributor of PowerBoard, surveying and supplying across the UK.
Certified and accredited
Installations we arrange are carried out by NICEIC or NAPIT registered electricians.
Ready when you are
Start as small or as big as you like.
Smallest step
Not sure yet? Try a PowerBoard 750W plug-in kit in one room. No electrician needed: it stands on wheeled feet or fixes to the wall, and plugs into a normal socket.
£418.80 inc VAT, delivered free
One room
Room kits with the panels and thermostat for one room, matched to its size. Your own qualified electrician fits them, or we can put you in touch with one from our installer network.
Prices on each kit
Whole home
Tell us about your home and we work out the heat loss room by room in a free remote survey, then send you a design and a quote.
Free, and no obligation
Questions
Send us your room sizes, a floor plan or the estate agent's plans, and we work out every room's heat loss, then the panels each room needs and where they go. It is done remotely, so there is no visit and no obligation, and you get a drawn plan for every room.
Yes. The whole house is designed together: every room sized, the panels placed on a plan, a thermostat in each room and the circuits worked out, so the electrician fits to a design. You can do it all at once or room by room, keeping your old heating running until you are ready.
Yes. We design battery storage and solar panels alongside the heating, and we usually suggest the battery first: it lets you store cheaper overnight electricity, or daytime solar, and use it to run the heating in the evening.
No, we only fit electric heating. If your gas boiler is near the end of its life, infrared is the all-electric replacement: nothing burns, so there is no flue and no gas supply needed. Our infrared vs gas boiler page compares the running costs.
Yes. Solid-walled terraces lose more heat, so they need more panels per room, which the survey works out room by room. The panels go on the ceiling, so cornicing, fireplaces and original floors stay as they are.
Yes. Ceiling panels replace panel or storage heaters with no work outside the flat, so there is no flue or outside pipework to agree with the building's managing agent.
Yes. Our integrated panel goes in with the plasterboard and is skimmed over, so the new ceiling looks like any other. We did exactly that in a new build extension in Llanharan, about 12 miles from Cardiff.
Not usually. There is nothing outside the house to approve: no flue, no outdoor unit and no tank. If your house is listed, ask Cardiff Council about listed building consent before any work to the ceilings.
Unit 8, Parc Gelli Werdd, Cross Hands, SA14 6EF, about 45 miles west of Cardiff along the M4.