Nothing on the walls. Heat only the rooms you use. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
PoweRad infrared ceiling panels sidestep all of these issues. They connect via standard mains wiring, no pipework, no extension to your boiler, no radiators on any wall. Panels can be mounted on both flat and angled ceiling sections, with the radiant output still effective at an angle.
Because infrared heats objects and people directly, loft rooms feel warm quickly, even in spaces where the roof insulation isn't perfect. Smart scheduling means you heat the room only when you're in it, keeping running costs low despite the thermal challenges of a roof space.
Watch our introduction to infrared heating, the technology behind every PoweRad loft conversion installation.
Loft rooms have specific constraints that make infrared the most practical and effective heating choice.
PoweRad panels can be mounted on angled ceiling sections, not just flat areas. Our designers account for ceiling geometry in every loft specification.
Connect to standard mains wiring only, no boiler upgrade, no radiator pipework to run up through the house, no expensive structural work.
Slim 12.5mm panels flush to the sloped ceiling keep the loft room looking clean and spacious, particularly important in rooms with limited headroom.
Room up to temperature
Set each space perfectly
Cool-touch panels
30 year design life
Loft rooms are often small with low walls, ceiling panels keep every usable surface free for furniture and storage.
We design around your exact ceiling geometry, placing panels on flat sections and supplementing with angled panel mounts where needed.
Loft heating runs completely separately, no impact on boiler capacity or hot water when you add a loft zone.
Whether your loft is a home office or occasional guest room, 2-minute warm-up means you heat it only when needed.
A qualified electrician can install and connect a loft heating system in one day, no trades coordination required.
All PoweRad panels are backed by a 10-year warranty, install once, forget the maintenance.
See exactly how many panels your loft conversion needs
Loft rooms vary significantly in size and ceiling geometry. Here's how typical specifications break down.
Insulation note: If roof insulation is below 100mm, we strongly recommend upgrading to 200mm+ before installing heating. The improvement in running costs is significant, and our design service will show you the before/after running cost comparison.
PoweRad PR-S-250 panel, 1200×600mm, 250W, surface or flush ceiling mount
Ready to plan your loft conversion heating?
Our specialists will design your system for free, no obligation.
Infrared panels run on standard mains wiring, no wet system extension, no boiler upgrade, no disruption to the rest of the house. Get a free custom loft heating design with panel placement layout, ceiling geometry accounted for, and running cost estimate.
Loft Conversion Heating, panels from £249 exc. VAT · 10-year warranty
Loft Conversion Heating from £249
The same loft conversion pitch in slide form, ideal for sharing with the family or your installer.