Nothing on the walls. Every room on its own smart thermostat. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
The panels
The controls
A thermostat for every room or zone. Large zones above 3,500 W also need a contactor.
The fitting
Priced by the electrician: your own, or one from our installer network. A two-panel room is about a morning's work, and an electrician fits two to three rooms a day.
Worked example
About 85 m² with average insulation, needing about 5.4 kW of panels in total. Two ways to do it, panels only, ex VAT:
Finished ceilings
£2,552
About 8 × 750W surface panels, fixed to the existing ceilings on brackets.
Ceilings open in a refurbishment
£5,478
About 22 × 250W integrated panels, boarded in and skimmed so nothing shows.
Add a thermostat for each room and the electrician's fitting. Each room is sized on its own, so the final count can differ by a panel or two; your free design gives the exact number. Running this house costs about £1,010 a year on our stated basis.
Your home
Send us your rooms and we will price the panels for your home.
Take a typical 3-bed semi of about 85 m² with average insulation, which needs about 5.4 kW of panels. On finished ceilings that is about 8 × 750W surface panels, £2,552 ex VAT. In a refurbishment with the ceilings open it is about 22 × 250W integrated panels, £5,478 ex VAT. Add a thermostat for each room and the electrician's fitting. Your free design gives the exact count.
We do not set the fitting price: your own electrician, or one from our installer network, quotes it. As a guide to the time involved, a two-panel room is about a morning's work and an electrician fits two to three rooms a day. The design tells them exactly what is needed before they price.
An electrician fits two to three rooms a day, so most homes take a few days. There is no pipework, no flue and no drained system, so each room is back in use as soon as it is finished rather than the whole house being out of action.
The design checks your incoming supply and consumer unit against the panel load and sets out the circuits. If an upgrade is needed, it is flagged at the design stage so it can be priced before you commit, not found halfway through.
Fitting ceiling panels is internal electrical work, so planning permission is not normally needed. The circuits are certified to BS 7671 and notified under the Building Regulations by your electrician. For a listed building, check anything specific with your conservation officer.
No annual service: the panels have no moving parts, no filters and no boiler. The running cost for the typical 3-bed above is about £1,010 a year on our stated basis (about 1,800 heating hours a year over the October to April heating season, panels drawing power about 38% of that time, 27p a kWh). Every panel carries a 10-year warranty.
A free remote survey gives you the panels each room needs, the circuits and the running cost, so your electrician can price the fitting.