Nothing on the walls. Heat only the rooms you use. Slim white PowerBoard panels on the ceiling warm people and everything in the room directly, instead of heating the air first. Supplied and installed across the UK.
Bathroom
Up to 5m², boarded in
£632 exc. VAT
Bedroom
Up to 12m², surface fit
£787 exc. VAT
Bedroom, integrated
Up to 12m², boarded in
£1,379 exc. VAT
Kitchen
Up to 16m², surface fit
You are viewing this kit
Living room
Up to 25m², surface fit
£1,485 exc. VAT
PowerBoard-S 750W Infrared Panel
Qty: 2
£698
WiFi Smart Thermostat
Qty: 1
£89
You will also need
Not included
The question that actually matters with electric heating.
Comparing with what you have now? See our worked examples against storage heaters, oil and gas.
77p
A day to run this kit, in typical zoned use
£23.38
A month across the heating season
£281
A year, spread over the full heating schedule
Based on about 5 heating hours a day with panels actually drawing power roughly 38% of that time, because thermostats cycle panels off once a room is at temperature and unoccupied rooms are not heated, at 27p/kWh. We keep this rate fixed, set just above Ofgem's price cap when we chose it (26.32p, October 2026).
A complete infrared heating solution for a standard UK kitchen (up to 16m²). Two PowerBoard-S 750W ceiling panels heat your kitchen directly - warming people and surfaces, with no fan blowing air around the room. No radiators taking up wall space, no pipes to box in. Smart thermostat included.
2× 750W panels and a WiFi thermostat - pre-matched, nothing else needed
1,500W total output heats kitchens up to 16m² - right for the majority of UK kitchen layouts
Infrared heats surfaces and people directly, with no fan blowing air and dust around the room
Independently tested to EN 60335-2-17, CE and UKCA marked, and suitable for kitchen use in the UK
Frame on, plug in, wire at the thermostat. Up to 7 x 500W or 4 x 750W panels run on one 16A circuit.
Side-by-side against the most common electric heating types people switch from.
Swipe the table sideways to compare all five heating types.
Surface mount, powder-coated, no painting required. Most electricians fit it in about half a day.
Mark ceiling joist positions and plan your cable route to the thermostat location.
Fix the surface mounting frame to the ceiling joists using the screws listed on the fixing guide sheet, supplied by your installer.
The panel lead connects at its sealed rear connection box, so there is no wiring to open up at the panel. Run the supply cable to the thermostat.
Connect the circuit at the thermostat (Part P certified electrician). Set temperature, verify operation, and you're done.
Three surface panels heating a living room, a real PoweRad installation
A real review, on our Google profile.
★★★★★ 5 out of 5 from 3 Google reviews · showing one of them
See how these systems were designed and installed in our case studies.
Frequently ordered alongside this product
Heat your living room or kitchen in 10 minutes - fewer panels, less wiring, no boiler
Heat your living room or open-plan space up to 25m² - 4 ceiling panels and a WiFi thermostat
The heating is one part of an all-electric home. Everything here is designed to run together, and we supply and specify all of it.
Run the heating on your own generation and cut the running cost to the export rate you gave up.
Room-by-room schedules, presence detection and one app for the whole house.
Divert surplus solar into the cylinder and heat water off-peak, alongside the panels.
Our team can help size the right system for your property, call free on 0800 342 3800
Kitchen Infrared Heating Kit
£787